home *** CD-ROM | disk | FTP | other *** search
- Path: news.lr.net!usenet
- From: ashw@lr.net (Ash Wyllie)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Need GURU-ROM help!
- Date: 7 Apr 1996 22:39:58 GMT
- Organization: LRNet
- Message-ID: <1026.6671T514T2797@lr.net>
- References: <4k6cuf$d7p@ceylon.gte.com>
- NNTP-Posting-Host: port34.lr.net
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP)
-
- >I just installed a GURU-ROM in my GVP A530 and I can't get it to work right.
- >When I boot the system I get either a black screen or an error message:
-
- > omniscsi.device: unit 000
- > invalid selection
- > $82/$00/$00/$0500/0
-
- >This is sometimes followed by a similar message:
-
- > omniscsi.device unit 000
- > invalid status
- > $84/$00/$30/$0500/1
-
- >Then I just get a blank workbench screen from which I can't do anything.
-
- >I set up the jumpers as directed in the manual: J10 is open (it was already
- >open in the first place) and CN18 goes from 2-3. Should I have made any
- >changes to my hard drive setup (drivers, changes to the RDB, etc.) _before_
- >I installed the ROM? If anyone who has successfully installed a GURU-ROM in
- >an A530 can help me with this I'd really appreciate it.
- >Or, alternatively, does anyone know Ralph Babel's e-mail address?
-
- >== Steve Borden
- > bordens@merrimack.edu
-
- I get the same error when my Migraph scanner is attached to the SCSI bus but
- is not turned on.
-
- -ash
-
-